|
Recording |
| Pen Type |
Disposable fiber tip |
| Pen Color |
Pen 1 - Red |
| Pen 2 - Green |
| Chart Size |
10 inch |
| Chart Drive |
Stepper motor |
| Chart Rotation |
User configurable; 8 hour, 12 hour, 24 hour or 7 day |
| Chart Span |
Bottom and top of span, -9999 to 9999 units |
| Inputs |
| Input Types/Range |
Type |
Range |
| Thermocouple |
J |
0°C to 70°C |
0°F to 1400°F |
| K |
0°C to 1360°C |
0°F to 2500°F |
| T |
-200°C to 400°C |
-330°F to 750°F |
| R |
200°C to 1650°C |
400°F to 3000°F |
| S |
200°C to 1650°C |
400°F to 3000°F |
| RTD |
100 ohm |
-140°C to 400°C |
-220°F to 750°F |
| Platinum |
| |
| .00385 ohms/ohm/°C |
| |
| Current DC |
0 to 20mA, 4 to 20mA |
| Internal 4.7 ohm Shunt Resistor |
| Voltage DC |
0 to 25mV, 0 to 50mV, 10 to 50mV, 0 to 5 V, 1 to 5 V |
| Input Performance |
| Performance Under Reference Condition |
| Measurement Error |
Type J, K, T, R, S and RTD: ±0.25% of span ±1 degree mA, mV and VDC: ±0.25% of scaled span plus 1 least significant digit |
| Cold Junction Compensation Error |
±0.2°C @ 25°C |
| Cold Junction Compensation Rejection |
0.04°/°C deviation from 25°C |
| Linearization Error expectations |
TCs: ±0.25°C typical, ±0.5°C worst case with
RTDs: ±0.1°C typical, ±0.3°C worst case |
| Ambient Temperature Error |
±0.01% of span per °C deviation from 25°C |
| Power Requirements |
| Line Voltage |
90-264 VAC, 50/60 Hz |
| Power Consumption |
18 VA Maximum |
| Construction |
| Enclosure |
Injection molded Noryl case and cover with acrylic window |
| NEMA Rating |
NEMA 3 standard |
| Mounting |
Panel or wall |
| Overall Dimensions |
14" wide x 14" high x 3.8" deep (355.6mm x 355.6mm x 96.5mm) |
| Panel Cutout |
12.7" wide x 12.7" high (322.58mm x 322.58mm) |
| Panel Depth |
2.5" (63.5mm) |
| Panel Protrusion |
1.3" (33.0mm) |
| Weight |
15 lbs maximum |
| Alarms |
| Number |
Up to two process alarms for each of two inputs |
| Type |
Process high or low |
| Limit Device output |
Optional high/low limits for each input with latching |
| Normally open output latches open |
| Red reset button included to the right of the display |
| Hysteresis |
Fully adjustable, 0 to 200 units, single sided |
| Security |
Alarm setpoint changes can be prohibited |
| Sensor Fault Action |
Alarms work normally in "Hi" and "Lo" conditions |
| Relay Outputs |
| Relays |
SPDT, contacts rated 5 amps resistive at 115 VAC, 2.5amps resistive at 230 VAC, 1/8 HP at 230 VAC (singlephase), 250 VA at 115/230 |
현재위치 : 
